Turnkey greenhouse

NovaTeplitsa offers turnkey greenhouse assembly. Forget about twisting profiles and the intricacies of fastening polycarbonate sheets - our specialists perform the entire range of work related to site preparation and greenhouse installation in the shortest possible time.

We control the quality of work together with you. Our employees are responsible, among other things, for:

• cleaning and waste removal after completion of work
• a complete set of tools necessary for assembly

NovaTeplitsa is a manufacturer and supplier of high-quality polycarbonate greenhouses in Ukraine. We offer assembly of various types of these structures:

• small-sized greenhouses
• classic arched greenhouses
• large greenhouses for large harvests

Greenhouse installation from NovaTeplitsa: enough talking about problems!

We know our products inside and out. NovaTeplitsa specialists assemble them as quickly and efficiently as possible. Cracks in the polycarbonate? A deformed frame? Leave these difficulties to non-professionals. With NovaTeplitsa, you get a finished product, free of defects and problems, fully assembled and 100% ready for use.

NovaTeplitsa greenhouses can be installed on a prefabricated foundation or on the ground.

Installation on the ground

In case of installation on the ground, it is recommended to level the installation site in advance. A flat area means a flat greenhouse, no bends in the polycarbonate. All work related to the preparation of the base can be done independently.

Installation on a foundation

Since the foundation can be either a timber box or a full-fledged concrete base. The recommendations of greenhouse manufacturers are exactly this type of foundation. Thus, the life cycle of the greenhouse is almost doubled. The client performs the work related to the arrangement of the foundations independently.

Basic greenhouse assembly diagram

Stage 1 – assembly of the frame

Stage 2 - assembly of the frame on the ground

Installing a greenhouse on the ground or a concrete foundation (depending on preferences and the type of greenhouse).

Evaluation of installation quality depending on the level

Step 3 - polycarbonate assembly

Fastening polycarbonate sheets to the frame. When assembling, the main technological features are taken into account - an allowance of 2-3 cm, assembly is carried out from the bottom up. Joints are sealed.

Stage 4 –  Installation and adjustment of fittings

Completion – stage 5 of greenhouse assembly.

The main advantages of a polycarbonate greenhouse

• The transmittance of transparent two-layer polycarbonate sheets reaches 87% and does not decrease with long-term use.
• The thermal insulation parameters of polycarbonate greenhouses are more than twice as high as those of their glass counterparts.
• Polycarbonate, unlike glass, is much easier to use, it is more difficult to break or shatter, which ensures durability, ease of transportation. It is 200 times more resistant to impacts than glass.