How to Calculate Greenhouse Water Use: A Complete Guide

Accurately calculating water consumption isn't just a matter of resource conservation. It's the foundation of a greenhouse business's profitability, the key to healthy plants, and the foundation for designing an effective irrigation system. Miscalculations at the design stage can have catastrophic consequences, from crop failure due to water shortages during peak periods to unnecessary investments in overly powerful equipment.

NovaTeplitsa has prepared a comprehensive guide based on agronomic and engineering practices. We will examine in detail all the factors affecting water consumption, review professional and simplified calculation methods, provide specific examples, and discuss Ukraine's regulatory framework.

Fundamental factors influencing water consumption

Calculating water consumption in a greenhouse is a multifactorial task. It's impossible to simply take an "average" figure. Water consumption is a dynamic value, dependent on four key factors.

Climate and weather conditions

This is the most powerful driver of water consumption. Plants evaporate water to cool themselves, and this process (transpiration) is directly related to the energy they receive.

• Solar radiation (insolation): The main factor. The more sun (measured in W/m² or MJ/m²/day), the more active photosynthesis and transpiration are. Water consumption is directly proportional to the radiation level.
• Air temperature: High temperatures increase evaporation and transpiration.
• Air humidity (vapor pressure deficit - VPD): This is one of the key indicators in modern greenhouses. VPD is the difference between the amount of water vapor in the air Maybe keep it at the current temperature, and how much it really contains.
  • Low VPD (high humidity): Plants have difficulty transpiring water. This can lead to leaf overheating and problems with calcium absorption (blossom end rot).
  • High VPD (low humidity): The air “pulls” moisture from plants, causing high transpiration and water stress.
• Wind speed: Affects naturally ventilated greenhouses by increasing air exchange and, consequently, evaporation.

Culture and its agricultural technology

• Crop type: Cucumber (has a larger leaf area) consumes significantly more water than, for example, lettuce or tomato.
• Development stage (Phenophase): Water consumption is minimal at the seedling stage and reaches its absolute peak during the period of mass fruiting and harvest.
• Leaf Area Index (LAI): This is the total leaf area per square meter of greenhouse space. In mature tomatoes, the LAI can reach 3-4 square meters per square meter, meaning the evaporative surface area is 3-4 times greater than the soil surface.
• Planting density: More plants per m² means higher total consumption.

Type of greenhouse and its equipment

• Covering material: Film, polycarbonate or glass transmit light (especially the UV spectrum) and retain heat differently, affecting the microclimate.
• Ventilation: Forced (fans) or natural (transoms). Ventilation efficiency directly impacts temperature and VPD.
• Shading systems (Screens): Energy-saving and shading screens radically change the microclimate, reducing insolation and, consequently, water consumption.

Irrigation technology and substrate

• Irrigation system:
  • Drip irrigation: The most common and effective (efficiency 90-95%). Allows water and nutrients to be delivered directly to the root zone.
  • Hydroponics (low-volume technology): Uses inert substrates (mineral wool, coconut) or systems (NFT, DWC). Here, drainage is required.
• Substrate type:
  • Soil: Has high buffering and water-holding capacity (WHC).
  • Mineral wool / Coconut substrate: Have limited VUS and require frequent, fractional watering (up to 10-20 times a day) to maintain optimal humidity and EC.

Methods for calculating water consumption

There are several approaches to calculation, from highly accurate scientific ones to simplified practical ones.

Method 1: Evapotranspiration (ET) – The “Gold Standard”

This method is the most accurate, as it is based on the physics of the process. Total water consumption (ET) is made up of:

• E (Evaporation): Evaporation from the surface of the substrate/soil.
• T (Transpiration): Evaporation through plant leaves (95-99% of total intake).

Professional agronomic calculations use reference evapotranspiration (ET₀), calculated using the complex Penman-Monteith formula, which takes into account radiation, temperature, humidity, and wind.

Next, the crop evapotranspiration (ETc) is calculated: ETc = ET₀ * Kc Where Kc — a crop coefficient that depends on its type and growth phase (for example, for a tomato at its peak it can be 1.05 – 1.2).

Practical application in a greenhouse: The Penman-Monteith formula is complex. In practice, agronomists using climate computers rely on direct measurements of solar radiation.

• Rule of thumb: A plant uses approximately 0.6 – 0.8 liters of water for every MJ (megajoule) of total solar radiation received per square meter.
• Example: On a sunny summer day in Ukraine, a greenhouse can receive 18 MJ/m² of radiation. Consumption = 18 MJ/m² * 0.7 l/MJ = 12.6 l/m² This clean plant consumption.

Method 2: Simplified (by area and crop)

This method uses average, proven water consumption rates per square meter or hectare. It is less precise, but sufficient for preliminary design and for greenhouses without complex automation.

Estimated peak water consumption rates (Summer, Ukraine):

Culture	Technology	Average peak consumption (l/m²/day)	Maximum (in case of heat) (l/m²/day)
Tomato	Low-volume (mineral wool/coconut)	6.0 – 9.0	12.0
Tomato	Ground greenhouse	5.0 – 7.0	9.0
Cucumber	Low-volume (mineral wool/coconut)	7.0 – 10.0	14.0
Cucumber	Ground greenhouse	6.0 – 8.0	11.0
Salad	Non-flow hydroponics (NFT)	3.0 – 5.0	7.0
Pepper	Low-volume (mineral wool/coconut)	5.0 – 8.0	10.0

Note: In spring/autumn periods these values may be 2-3 times lower (2-4 l/m²/day).

Method 3: Calculation through drainage (for hydroponics)

It's not so much a method design, how much method daily management watering. Its purpose is to prevent excess salts (EC) from accumulating in the substrate.

Logic: We supply water more, than the plant can consume, and measure the excess (drainage).

V_consumption = V_supply - V_drainage

Target drainage percentage:

• Mineral wool: 25-35%
• Coconut substrate: 20-30%

This means that if we want the plant to consumed 6 l/m², we should submit to him: V_supply = V_consumption / (1 - %drainage) V_flow = 6 l / (1 - 0.30) = 6 / 0.7 = 8.57 l/m²

Thus, the irrigation system should be designed to supply 8.57 l/m², of which 6 l will go into the plant, and 2.57 l (30%) will go to drainage.

Example of complex calculation (System design)

Let's calculate the daily requirement and the required pump power for a farm greenhouse.

Initial data:

• Object: Greenhouse 1500 m² (0.15 ha).
• Location: Cherkasy Oblast, Ukraine.
• Culture: Tomato (indeterminate).
• Technology: Low-volume, coconut substrate.
• Irrigation system: Drip irrigation.

Step 1: Determining Peak Daily Intake

We design the system for the hottest, sunniest day in July (peak fruiting).

• We take the maximum rate from the table (Method 2) for tomato on coconut: 9.0 l/m² (this is the net consumption of the plant).
• We add a reserve for abnormal heat: +20% = 9.0 * 1.2 = 10.8 l/m².

Step 2: Accounting for drainage

For coconut we need drainage ~30% to wash out salts.

• V_supply (total) = V_consumption / (1 - %drainage)
• V_flow = 10.8 l/m² / (1 - 0.30) = 10.8 / 0.7 = 15.43 l/m²
• Round up to 15.5 l/m².

Step 3. Calculating the total daily volume

• V_day = V_supply * Area
• V_day = 15.5 l/m² * 1500 m² = 23,250 liters
• Total: 23.25 m³ per day. This is the volume of water that must be available (storage tank, well).

Step 4. Calculating the required pump capacity (Q)

Irrigation in a greenhouse isn't 24 hours a day. It's done in cycles (for example, 15 5-minute cycles). The total pumping station runtime per day (the sum of all cycles) on a peak day could be, for example, 3-4 hours.

• Let's take for calculation 4 hours (240 minutes) of pump operation per day.
• Q (m³/hour) = V_day / Operating time
• Q = 23.25 m³ / 4 hours = 5.81 m³/hour
• We add engineering reserve 15% (for losses in pipes, pump wear):
• Q_required = 5.81 * 1.15 = 6.68 m³/hour

Conclusion: This greenhouse requires a pumping station with a capacity of at least 6.7 m³/hour (or ~112 l/min), capable of creating the required operating pressure (usually 1.5-2.5 atm for drip systems).

Technical aspects and equipment markings

Drip irrigation

• Drippers: Pressure-compensated (PC) drippers are used almost exclusively in greenhouses. They deliver a consistent volume of water (e.g., 2 l/h) at varying system pressures (0.5-3.0 bar), which is critical for uniform watering.
• Marking: Key parameter – water flow (l/h).
  • 2.0 l/h: Standard for most substrates (mineral wool, coconut).
  • 3.0 - 4.0 l/h: Used less frequently, for soils or very “drinking” crops.
• Distance between drippers:
  • Tomato, Cucumber (on substrate): 30-40 cm.
  • Pepper: 25-33 cm.
• Line calculation: If you have a 100-meter row with 2 l/h drippers every 30 cm (3.3 pcs/m), then: Consumption per row = 100 m * 3.3 pcs/m * 2 l/h/pc = 660 l/h (0.66 m³/h) This knowledge is necessary for the correct selection of the diameter of the main pipes.

Pipes and sizes

• Drip tube (blind) with droppers: 16 mm or 20 mm.
• Distribution (secondary) lines: HDPE pipe 32 mm, 40 mm, 50 mm.
• Main line (from the pump): HDPE or PVC 50 mm, 63 mm, 75 mm, 90 mm (depending on the total flow rate).

Standards and tolerances in Ukraine

Water quality

There is no single "DSTU for irrigation water." Agronomists rely on recommended parameters. Ideally, the source water (from a well or reservoir) BEFORE mixing with fertilizers should meet the following:

Parameter	Designation	Recommended limit (Ukraine)	Problems when exceeding
Electrical conductivity	EC	< 1.0 mS/cm (max. 1.5)	It is difficult to prepare a nutrient solution, there is a risk of salinization
Acidity	pH	5.5 – 7.0	Problems with fertilizer solubility, corrosion
General hardness	–	< 4.0 mmol/L	Clogging of IV drips (calcium, magnesium)
Bicarbonates	HCO₃⁻	< 120 mg/l	Alkalization of the substrate, blocking of drippers
Sodium	Na⁺	< 50 mg/l	Toxic to plants, destroys soil structure
Chlorine	Cl⁻	< 70 mg/l	Toxic to plants (especially cucumber, rose)
Iron (total)	Fe	< 0.5 mg/l (max 1.0)	Severe clogging of IV drips (glandular bacteria)

Conclusion: Before designing a greenhouse, laboratory water analysis is essential. The choice of water treatment system (iron removal, softening, reverse osmosis) depends on it.

Disposal of drainage

This is one of the most pressing environmental issues. The Water Code of Ukraine and other regulations prohibit the discharge of drainage water (containing high concentrations of nitrates and phosphates) into open water bodies or onto the ground.

• Solution: Modern greenhouse complexes are required to design recirculation (closed loop) systems.
• Process: Drainage is collected, filtered, disinfected (usually with UV sterilizers or ozonation), and returned to the solution unit for reuse. This saves up to 20-30% of water and fertilizer and solves an environmental problem.

Expert advice and common mistakes

• Mistake: Designing "to the limit." Never design the pump and lines exactly for the estimated peak demand. Always have a reserve of 15-25%. During an abnormally hot week, a system operating at 100% will fail.
• Tip: Start with a water test. This is the foundation. A reverse osmosis system can be expensive, and you need to know that. to start of construction.
• Mistake: Skimping on automation. Watering "by the clock" (with a timer) is a thing of the past. On a cloudy day, it will overwater the plants; on a sunny day, it will underwater. The minimum necessary automation is a solar radiation-based irrigation controller. It only initiates irrigation cycles when the plant has "worked" (received a dose of sunlight).
• Tip: Consider storage. A well or borehole can rarely provide peak flow (e.g., 7 m³/hour). A storage tank (a reservoir or cistern) is needed that fills slowly from the source and empties quickly with an irrigation pump. Its capacity should cover at least 1-2 days of peak demand.
• Tip: Monitoring. The most accurate calculation is daily measurement. Install simple lysimeters (scales under 1-2 mats) in the greenhouse or simply measure the drainage volume from several rows. This will give you a realistic picture of consumption and allow you to adjust watering in a timely manner.